Mitsubishi Electric WD-60737 страница 29 Скачать руководство пользователя

Страница: 29 / 69

Page 29

MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737

WD-65837 / WD-73837 / WD-82837

SELF DIAGNOSTICS

To activate, press the front panel

ACTIVITY> + <CH

buttons at the same time and hold for 5 seconds.

The STATUS LED will then flash denoting a two digit code.

•

The number of flashes indicates the value of the MSD (tens digit) of the Error Code.

•

The flashing then pauses for approximately 1/2 second.

•

The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.

•

The Error Code is repeated a total of 5 times.

Example: If the Error Code is “23”, the LED will flash two times, pause, and then flash three times.

Note:

The TV must be in “Shut Down” and the LED will probably be indicating an abnormal condition.
If the TV is switched Off, AC is removed, or a System Reset is performed, the code automatically

resets to “12” No Error. See the Error Code Log to retrieve a history of errors.

Note:

Use the front panel buttons, not the remote control.

Note:

If there is no response, the front panel may be locked by a V-Chip setting. To unlock, press and hold

ACTIVITY>

on the front panel for 5 seconds.

LED INDICATIONS AND SELF DIAGNOSTICS

The front panel Status LED provides an indication of the set’s operation and the possible cause of a malfunction.

STATUS LED Indication

Condition

Off

Off (standby)

Green

Power On

Slow Blink Green

Power Off with Timer Set

Fast Blink Green (80 seconds) > Off

Power Off (Cooling fan still working, 80 sec)

STATUS LED Indication

Condition

Red

Lamp Failure

Yellow

TV Too Hot

Slow Blink Red

TV May Require Service

Slow Blink Yellow

Lamp Door Open or No Lamp Installed

NORMAL INDICATIONS

ABNORMAL INDICATIONS

(For details perform Self Diagnostics procedure.)

Front Panel (Location and Appearance Differs by Model)

ACTIVITY

ENTER

POWER

STATUS

VOL

Содержание WD-60737






































































Результаты поиска

Содержание WD-60737

Отзывы:

Похожие инструкции для WD-60737

Бренды по названию

Популярные бренды

Mitsubishi Electric WD-60737, Руководство по обслуживанию

Результаты поиска

Содержание WD-60737

Отзывы:

Похожие инструкции для WD-60737

Бренды по названию

Популярные бренды