Mitsubishi Electric VL-350CZPVU-R-E, Быстрый старт

Страница: 1 / 8

Heat exchange system Heat recovery ventilating system
Heat exchanger material Sensible heat exchanger
Cladding Steel sheet
Heat insulation material Polyethylene foam
Motor DC motor
Blower 210mm diameter centrifugal fan
Filter Non-woven fabrics filter
Duct connecting Synthetic resin
Duct connecting cover Styrene foam
Outside air condition Shall be higher than -15
℃
Return(Suction) air condition Shall be lower than 40
℃
, 95%RH
Surrounding air condition
Indoor temperature and humidity should not exceed the dew point temperature 12
℃
(e.g. RH60% / 20
℃
)
-3
℃
to -15
℃
: Intermittent operation
※
Continuous exhaust air
-15
℃
or less : Continuous supply air stopped.
Function
623mm x 658mm x 432mm
Weight 32kg
Electrical power supply 220-240V
～
50Hz / 220V
～
60Hz
Insulation resistance
10MΩ or more
Dielectric strength AC 1000V 1 minute
Maximum current [A] 1.32
Ventilation mode
Fan speed
Running current
[A]
Input power [W]
Air volume
[m
3
/h]
[L/s]
External static pressure [Pa]
[dB]
ErP Class
※
Specification may be subject to change without notice.
DATE TYPE Heat Recovery Ventilator LOSSNAY
MODEL VL-350CZPVU-R-E
90
150 74 38 14
1/6
35 26 19 15 >
SPECIFICATIONS
12-Jan-21
NUMBER
N19SGGD0003B
Sound Pressure level
@3m
A+
Temperature exchange
efficiency [
％
]
Dimensions
(Height x Width x Depth)
89 62 44
85 87 88
27
Heat recovery ventilation/ Bypass ventilation, Fan speed 1,2,3,4
The air flow increment by 1% from 25% to 100%
Heat recovery mode
Fan Speed 4 (100%) Fan Speed 3 (70%) Fan Speed 2 (50%) Fan Speed 1 (30%)
MODEL VL-350CZPVU-R-E
Supply fan operation under
low outdoor temperature
1.08 0.52 0.31 0.18
155 71 37 19
320 224 160 96
■
Specification
■
Attention
1. The above values are at factory default.
2. The running current, the input power, the efficiency and the noise are based on the rating air volume,
and 230V/50Hz.
3. The sound pressure level at 3m is spherical.
4. Temperature exchange efficiency (%) is based on winter condition.
5. Mitsubishi Electric measures figures in the chart according to EN13141-7:2010, and the characteristic curves
are measured by chamber method.