Mitsubishi Electric VL-100U-E, Руководство пользователя

Страница: 4 / 7

– 4 –
English
Maintenance
To maximize the life of Lossnay, clean off any accumulated dirt and dust on the air filter and Lossnay
Core at least once every six months.
■
Be sure to stand on a stable surface when attaching or removing parts during maintenance.
WARNING
• Always remove the power plug from the wall
outlet before starting maintenance work.
Do not insert or remove the plug with wet
hands.
(electric shock or injury could result)
1
2
1. Pull the cord to turn off.
2. Make sure the fan has stopped turning.
3. Remove the power plug from the wall outlet.
Make sure the fan has stopped turning and then
remove the panel.
• Loosen the screw holding the panel, and pull the
panel forward to remove it.
Panel
3
Remove the Lossnay Core.
• Pull it forward to remove it.
Lossnay Core
4
Remove the air filter.
• Remove it from the catches on the Lossnay Core.
Cleaning: Use a vacuum cleaner to remove dust.
• You can also rinse it with
lukewarm water or wash it with a
neutral detergent solution.
Replacement: Replace the filter with the separately
sold parts (P-30F) when it has been
rinsed about five or six times. You will
need to trim the filter to a size of 346 x
115 (mm).
Air filter
Catches
Lossnay Core
Cleaning the outside air filter
Vacuum cleaner
Air filter
Can be rinsed
Note
• The filter may be damaged by rinsing it with hot water or scrubbing it.
• After rinsing, be sure to dry the filter.
• Do not forget to put the filter back.