Page 20
MODELS: LT-55154 / LT-40164 / LT-46164 / LT-55164 / LT-46265 / LT-55265
LED INDICATIONS AND SELF DIAGNOSTICS
The front panel Status LED provides an indication of the set’s operation and the possible cause of a malfunction.
SELF DIAGNOSTICS
A blinking red and yellow Status LED will indicate an Error Code that can help determine the cause of a circuit
failure.
•
The number of Red blinks indicates the value of the MSD (tens digit) of the Error Code.
•
The number of Yellow blinks indicates the value of the LSD (ones digit) of the Error Code.
Example: If the Error Code is “27”, the LED will continuously blink Red two times, followed by blinking Yellow
seven times.
See the following page for a list of Error Codes.
To perform a System Reset, press and hold the side Power button for 10 seconds. Or, unplug the set for 10 sec-
onds then restore power
NORMAL INDICATIONS
STATUS LED Indication
Condition
Off Off
(Standby)
Green Power
On
Slow Blinking Green
Power Off with Timer Set
Fast Blinking Green
Power On Boot-up, AC Interrupted, System
Reset or Software Update (Wait from between
45 seconds to several minutes for blinking to
stop before proceeding)
STATUS LED Indication
Condition
ABNORMAL INDICATION
Blinking Red then Blinking Yellow
Circuit Failure (See Self Diagnostics)
Number of Red Blinks
Number of Yellow Blinks
2
7
Error Code: 27
Содержание Unisen LT-40164
