36
12
DISASSEMBLY INSTRUCTIONS
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector has the
locking mechanism.
Slide the sleeve.
Pull the terminal while
pushing the locking
lever.
Hold the sleeve, and
pull out the terminal
slowly.
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
<"Terminal with locking mechanism" Detaching points>
Connector
Sleeve
Locking lever
NOTE
: Turn OFF power supply before disassembling.
S
O
T
O
P
E
R
U
D
E
C
O
R
P
G
N
I
T
A
R
E
P
O
1. Removing the cabinet
(1) Remove the screw fixing the service panel.
(2) Pull down the service panel and remove it.
(3) Disconnect the power supply and indoor/outdoor con-
necting wire.
(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the back panel.
Photo 1
Photo 2
Back
panel
Screws
of the back
panel
Service
panel
Screws of the
top panel
Screws of
the cabinet
Screws of
the top panel
Screw of the
service panel
Direction to
remove
Screws of
the cabinet
Hooks
Screw of the
cabinet
H
SUZ-KA25VA4.TH SUZ-KA35VA4.TH
OUTDOOR UNIT
OCH545
Содержание SUZ-KA25VA4
Страница 13: ...13 13 7 WIRING DIAGRAM SUZ KA25VA4 TH SUZ KA35VA4 TH OCH545 ...
Страница 14: ...14 SUZ KA50VA4 TH OCH545 ...
Страница 15: ...15 SUZ KA60VA4 TH SUZ KA71VA4 TH OCH545 ...
Страница 45: ...45 OCH545 ...
