77
4. FAN operation (Only SE)
<How to operate>
1
Press POWER ON / OFF button.
2
Press MODE SELECT button to set operation mode to FAN.
NOTES : Temperature can not be set in FAN operation.
(1) Indoor fan control
The indoor fan speed LOW / HIGH depends on the remote controller setting.
MITSUBISHI ELECTRIC
12
11
10
9
8
7
6
5
4
3
2
1
29
28
27
26
25
24
23
22
21
20
19
18
TIMER
TEMP
TIMER/TEMP.
UP
DOWN
POWER
COOL
ON/OFF
MODE
SELECT
FAN
SPEED
TIMER
MODE
DRY
FAN
HIGH
LOW
AUTO
STOP
START
5. TIMER operation
<Timer function>
AUTO STOP ·········Air conditioner stops after the set time lapses.
AUTO START ········Air conditioner starts after the set time lapses.
<How to operate
●
AUTO STOP timer>
1
While
lamp is lighting, press TIMER MODE button.
and
lamps turn ON.
2
Set the time for the AUTO STOP timer with the UP or DOWN button.
NOTE : The time setting is in 1 hour units up to 12 hours.
3
With the lapse of time, the timer lamps turn OFF one by one, showing the remain-
ing time.
4
To cancel the AUTO STOP timer and continue operation, press the TIMER MODE
button.
To cancel the AUTO STOP timer and stop operation, press the POWER ON/OFF
button.
<How to operate AUTO START timer>
1
While
lamp is OFF, press TIMER MODE button.
and
lamps turn ON.
2
Set the time for the AUTO START timer with the UP or DOWN button.
NOTE : The time setting is in 1 hour units up to 12 hours.
3
With the lapse of time, the timer lamps turn OFF one by one, showing the remain-
ing time.
4
To cancel the AUTO START timer and keep the unit OFF, press the TIMER MODE
button.
To cancel the AUTO START timer and start operation, press the POWER ON /
OFF button.
TIMER
POWER
TIMER
●
POWER
MITSUBISHI ELECTRIC
12
11
10
9
8
7
6
5
4
3
2
1
29
28
27
26
25
24
23
22
21
20
19
18
TIMER
TEMP
TIMER/TEMP.
UP
DOWN
POWER
COOL
ON/OFF
MODE
SELECT
FAN
SPEED
TIMER
MODE
DRY
HEAT
HIGH
LOW
AUTO
STOP
START
g
6. TEST RUN
The unit starts the test run by pressing both the UP and DOWN buttons simultaneously for more than two seconds during
lamp ON or the unit OFF.
●
The test run automatically stops in 2 hours.
●
Set temperature is not displayed during test run.
●
During the test run, the thermo function are as below.
●
Room temperature is displayed by the flashing green lamp when TIME/TEMP button is pressed.
●
The test run can be released by pressing the POWER ON / OFF or the TIMER MODE button.
TIMER
Initial 30 minutes
Thermo ON at the all time
Since 30 minutes passed to terminating of the
test run
Thermo ON/OFF as 24
:
of setting
temperature
OC281-B-3.qxp 04.2.10 2:23 PM Page 77