Eng-11
Icon explanations
F1
F2
F3
F4
Timer
Enter administrator password
Select:
Cursor
Controller operation
Timer
P
The table below
summarizes the square
icons used in this manual.
The administrator password must be entered on the password input screen to
change settings. There is no settings that can skip this process.
: Press to move the cursor left.
: Press to move the cursor right.
: Press to decrease the value by 1.
: Press to increase the value by 1.
*Changes cannot be made unless the correct password
is entered.
Indicates settings that can be
changed only while the units
are in operation.
Indicates setting that can be changed
only while the units are not in operation
Indicates settings that can be
changed while the units are in
night-purge operation.
Indicates functions that are not
available when the buttons are locked.
Indicates functions that are
not available when system is
centrally controlled.
Indicates settings that can be made
only from the main remote controller.
ON
Main
P
OFF
Main
