SP007-2
1
FEATURES
1. THE PUG CONDENSING UNIT IS A COOLING ONLY MODEL WHILE THE PUGH
IS A HEAT PUMP
2. PUG OUTDOOR CONDENSING UNITS ARE DESIGNED SPECIFICALLY FOR USE
WITH MITSUBISHI ELECTRIC PK, PC AND PL MR. SLIM INDOOR UNITS OF
MATCHING NOMINAL CAPACITY
These units are provided with an outdoor circuit board that is “standard to all models” and operates all functions
of the condensing unit. The board also provides operational and diagnostic functions to the technician through the
use of LEDs.
3. PUGH OUTDOOR UNITS ARE DESIGNED SPECIFICALLY FOR USE WITH MITSUBISHI
PKH, PCH AND PLH MR. SLIM INDOOR UNITS OF MATCHING NOMINAL CAPACITY
These units are also provided with the same "standard to all models" outdoor circuit board which operates all
functions of the outdoor unit. Operational and diagnostic functions are easily accomplished by routine trou-
bleshooting steps when using the LED diagnostic displays located on the circuit board.
4. ALL PUG AND PUGH UNITS OF 18,000 BTU’S THROUGH 42,000 BTU’S ARE DRIVEN
BY A HIGH EFFICIENCY COPELAND SCROLL COMPRESSOR
5. ALL UNITS ARE FACTORY PRECHARGED WITH REFRIGERANT FOR LINE SETS
OF UP TO 100 FEET
This greatly simplifies installation and saves time by eliminating the need to calculate additional refrigerant
charges.
PUG
PUGH
SP007-2