5
PART NAMES AND FUNCTIONS
2
●
Indoor (Main) Unit
●
Remote controller
●
Operation buttons
[PAR-F25MA]
●
Once the controls are set, the same operation mode can
be repeated by simply pressing the ON/OFF button.
Press this button to switch the cooling,
electronic dry (dehumidify), automatic
and heating modes.
OPERATION SWITCH button
This sets the room temperature. The
temperature setting can be performed
in 1
:
units
Setting range
Cooling 19
:
to 30
:
Heating 17
:
to 28
:
TEMPERATURE ADJUSTMENT button
This switches between continuous
operation and the timer operation.
TIMER button
This switches between the operation
and stop modes each time it is pressed.
The lamp on this button lights during
operation.
ON/OFF button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.
CHECK-TEST RUN button
This switches the horizontal fan motion
ON and OFF.
(This button does not operate on this
model)
LOUVER button
This adjusts the vertical angle of the
ventilation.
AIR DIRECTION button
This resets the filter service indication
display
FILTER button
This sets the current time, start time
and stop time.
TIME SETTING button
This sets the ventilation fan speed.
AIR SPEED button
Auto Air Swing Vane
Disperses airflow up and
down and adjusts the angle
of airflow direction.
Grille
Filter
Removes dust and pollutants
from intake air
Horizontal Air Outlet
Sets airflow to horizontal automatically
during cooling or dehumidifying.
Air Intake
Intakes air from room.
OC213--1.qxp 8/30/00 5:40 PM Page 5
