Mitsubishi Electric PKFY-P20VAM-A Скачать руководство пользователя страница 18

Страница: 18 / 24

OPERATION PROCEDURE

PHOTOS & ILLUSTRATIONS

3. REMOVING THE INDOOR MICRO CONTROLLER BOARD

AND INDOOR POWER BOARD

(1) Remove the front panel. (Refer to 2)
(2) Remove the electrical box cover (screw 4

10).

(Refer to the photo 2)

INDOOR MICRO CONTROLLER BOARD
(1) Disconnect the following connectors on the indoor micro

controller board.

(connector in front of)

●

CN60, CN5V, CN34, CN29, CN21

●

CN42, CN81, CN3A, CN20

(2) Pull out the indoor micro controller board toward you, then

disconnect the rest of connectors.

●

CN53M, CN35M (See the photo 3)

INDOOR POWER BOARD
(1) Disconnect the following connectors on the indoor power

board.

●

FAN, CN53P, CN35P, CN2M, CND

(2) Remove the screws of the indoor power board, then pull out

the indoor power board toward you. (See the photo 3)

Photo 2

Electrical box cover

Screw cap

Electrical box

Photo 3

Indoor micro controller board

Indoor power
board

4. REMOVING THE ELECTRICAL BOX

(1) Remove the front panel. (Refer to 2)
(2) Remove the electrical box cover.

(3) Pull the nozzle assembly toward you as opening the catch

of the nozzle assembly.

(4) Disconnect the indoor/outdoor connector.
(5) Disconnect the following connector on the indoor micro

controller board. (See the photo 4)

●

CN60, CN5V, CN34, CN29, CN21, CN20, CN3A

(6) Disconnect the following connector on the indoor power

board. (See the photo 4)

●

FAN, CN2M, CND

(7) Disconnect the ground wire.
(8) Pull the disconnected lead wire out from the electrical box.
(9) Push up the upper fixture catch to remove the box, then

pull the lower fixture and remove it from the box fixture.

Photo 4

Indoor micro
controller board

fixture (upper)

Indoor power
board

fixture (lower)

Ground wire set screw

Electrical box

OC254---1.qxp 2/20/01 11:06 AM Page 18

Содержание PKFY-P20VAM-A

























Результаты поиска

Содержание PKFY-P20VAM-A

Отзывы:

Похожие инструкции для PKFY-P20VAM-A

Бренды по названию

Популярные бренды

Mitsubishi Electric PKFY-P20VAM-A, Техническое и сервисное руководство

Результаты поиска

Содержание PKFY-P20VAM-A

Отзывы:

Похожие инструкции для PKFY-P20VAM-A

Бренды по названию

Популярные бренды