Mitsubishi Electric PKA-M-HA, Руководство по установке

Страница: 14 / 268

14
6. Electrical work
6.3. Function settings
6.3.1. Function setting on the unit (Selecting the unit functions)
1) For wired remote controller
1
(Fig. 6-5)
• Select “Service” from the Main menu, and press the [SELECT] button.
• Select “Function settings” with the [F1] or [F2] button, and press the [SELECT]
button.
2
(Fig. 6-6)
• Set the indoor unit refrigerant addresses and unit numbers with the [F1]
through [ F4 ] buttons, and then press the [ SELECT ] button to confirm the
current setting.
<Checking the Indoor unit No.>
When the [ SELECT ] button is pressed, the target indoor unit will start fan opera-
tion. If the unit is common or when running all units, all indoor units for the se-
lected refrigerant address will start fan operation.
3
(Fig. 6-7)
• When data collection from the indoor units is completed, the current settings
appears highlighted. Non-highlighted items indicate that no function settings
are made. Screen appearance varies depending on the “Unit No.” setting.
4
(Fig. 6-8)
• Use the [ F1 ] or [ F2 ] button to move the cursor to select the mode number, and
change the setting number with the [ F3 ] or [ F4 ] button.
5
(Fig. 6-9)
• When the settings are completed, press the [ SELECT ] button to send the
setting data from the remote controller to the indoor units.
• When the transmission is successfully completed, the screen will return to the
Function setting screen.
F1 F2 F3 F4
Service menu
Cursor
Main menu:
Test run
Input maintenance info.
Function setting
Check
Self check
F1 F2 F3 F4
Function setting
Cursor Address
Monitor:
Ref. address
Unit No.
Grp. /1/2/3/4/All
Fig. 6-5 Fig. 6-6
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Grp.
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 7
Mode 8
Mode 9
Mode 10
Unit # 1
Fig. 6-7 Fig. 6-8
F1 F2 F3 F4
Function setting
Ref. address
Sending data
Grp.
Fig. 6-9
RG79F160H01_en.indd 14 1/12/2017 9:08:12 AM