Mitsubishi Electric PH50 series, Руководство по установке и настройке

Страница: 75 / 122

REV 2.5
75
6. Tighten the two lamp fixing screws.
7.
R
R
e
e
a
a
r
r
:
Close the lower door.
F
F
r
r
o
o
n
n
t
t : Perform “Dust filter cleaning” (chapter 2.4.3,
on page 85) as needed, and close the screen unit
(chapter 1.2.7.2, on page 24).
8. After the replacement, perform “Condenser lens adjustment” (chapter 2.2, on page 83),
“Color balance adjustment” (chapter 1.5.2, on page 46) or “Picture outline adjustment”
(chapter 1.4.3, on page 30) as needed.
•
You don’t have to reset the lamp timer value since the lamp operating time is
automatically updated when a lamp is replaced. As needed, you can reset it manually in
LAMP TIMER RESET in MAINTENANCE in the system menu.
•
If TERGET COLOR (chapter 1.5.2.6, on page 49) has been set, the color is
automatically adjusted to be optimal at lamp replacement.
•
If SENSOR (chapter 1.5.2.7, on page 49) has been set RUN, the brightness is
automatically adjusted to be uniform across a display wall.
Lamp fixing
screws