Mitsubishi Electric PEFY-P20VMR-E-L, Техническое и сервисное руководство, Страница: 8 / 24

- 4 -
[
III
SPECIFICATIONS ]
III SPECIFICATIONS
[3] SPECIFICATIONS
3-1. Specifications
Model PEFY-P20VMR-E-L/R PEFY-P25VMR-E-L/R PEFY-P32VMR-E-L/R
Cooling capacity *1 kW 2.2 2.8 3.6
Heating capacity *1 kW 2.5 3.2 4.0
Power supply voltage/frequency Single-phase 220/230/240 V 50Hz 220/230 V 60Hz
Power consumption
Cooling kW 0.06/0.06 0.07/0.08
Heating kW 0.06/0.06 0.07/0.08
Current consumption
Cooling A 0.29/0.29 0.34/0.38
Heating A 0.29/0.29 0.34/0.38
Settable temperature
range on the remote
controller
Cooling °C (°F) 19 to 30 (67 to 86)
Heating °C (°F) 17 to 28 (63 to 83)
Fan
Type × Quantity Sirocco fan × 1
External static pressure
5
Single-phase induction motor
Motor output kW 0.018 0.023
Driving mechanism Direct-driven
Airflow rate
(Low-Mid-High)
m
3
/min 4.8-5.8-7.9 4.8-5.8-9.3
External finish Galvanized
External dimensions
H × W × D
Rear inlet model
mm 292 × 640 × 580
In. 11-1/2 × 25-1/4 × 22-7/8
Bottom inlet model
mm 300 × 640 × 570
In. 11-7/8 × 25-1/4 × 22-1/2
Net weight kg 18
Wire
Min. wire size mm (in.) 1.6 (1/8)
Breaker amperage A 16
Refrigerant pipe
diameter
Liquid R410A mm (in.) ø6.35 (ø1/4) Brazed connection
Gas R410A mm (in.) ø12.7(ø1/2) Brazed connection
Drain pipe diameter mm (in.) Drain hose O.D. 26 (1-1/32)
Operating noise *2
(Low-Mid-High)
(measured in
anechoic room) 220V dB<A> 20-25-30 20-25-33
230V dB<A> 21-26-32 21-26-35
240V dB<A> 22-27-30 22-27-33
Insulation material Polyethylene foam, Urethane foam
Air filter PP Honeycomb fabric (washable)
Refrigerant control device LEV
Connectable outdoor unit R410A CITY MULTI
Protection devices Fuse
Heat exchanger Cross fin (Aluminium fin and copper tube)
Note: *1 Maximum capacity of the unit under the following conditions
<Cooling> Indoor temperature: 27°CDB/19°CWB (81°FDB/66°FWB Outdoor temperature: 35°CDB (95°FDB)
<Heating> Indoor temperature: 20°CDB (68°FDB) Outdoor temperature: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5m (24-9/16ft) Height difference: 0m (0ft)
*2 Noise levels of the unit with a rear air inlet. (Noise levels are higher for the unit with a bottom air inlet.)