– 6 –
<Screen Types>
Function Selection of remote controller:
Set the functions and ranges available to the remote
controller (timer functions, operating restrictions, etc.).
Set Day/Time:
Set the current day of the week or time.
Standard Control Screens: View and set the unit’s operation status.
Timer Monitor:
View the currently set timer (weekly timer, simple timer,
or Auto Off timer)
Timer Setup:
Set the operation of any of the timers (weekly timer,
simple timer, or Auto Off timer).
<How to change the screen>
A
: Hold down both the Mode (Return) button and the Timer ON/OFF button for 2
seconds.
B
: Press the Timer Menu button.
C
: Press the Mode (Return) button.
D
: Press either of the Set Time buttons (
or
).
Use this screen to change the current day of the week and time setting.
Note:
The day and time will not appear if clock use has been disabled at Function Selection
of remote controller.
<How to Set the Day of the Week and Time...>
1. Press the
or
Set Time button
a
to show display
2
.
2. Press the Timer ON/OFF (Set Day) button
9
to set the day.
* Each press advances the day shown at
3
: Sun
J
Mon
J
...
J
Fri
J
Sat.
3. Press the appropriate Set Time button
a
as necessary to set the time.
* As you hold the button down, the time (at
4
) will increment first in minute
intervals, then in ten-minute intervals, and then in one-hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press the CIR.WATER
button
4
to lock in the values.
3
Screen Configuration
Function Selection of remote controller
Set Day/Time
Standard Control Screens
Timer Monitor
Timer Setup
A
D
C
B
C
B
OFF
ON
4
Setting the Day of the Week and Time
Day of the Week &
Time display
Time Setting
Day of the Week Setting
