– 18 –
Function selection of remote controller
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed.
Item 1
Item 2
Item 3 (Setting content)
1. Change Language
(“CHANGE
LANGUAGE”)
Language setting to display
• Display in multiple languages is possible
2. Function limit
(“FUNCTION
SELECTION”)
(1) Operation function limit setting (operation lock) (“LOCKING
FUNCTION”)
• Setting the range of operation limit (operation lock)
(2) Operation mode skip setting (“SELECT MODE”)
• Setting the use or non-use of each operation mode
(3) Temperature range limit setting (“LIMIT TEMP FUNCTION”)
• Setting the temperature adjustable range (maximum, minimum)
3. Mode selection
(“MODE
SELECTION”)
(1) Remote controller main/sub setting (“CONTROLLER MAIN/
SUB”)
• Selecting main or sub remote controller
* When two remote controllers are connected to one group, one
controller must be set to sub.
(2) Use of clock setting (“CLOCK”)
• Setting the use or non-use of clock function
(3) Timer function setting (“WEEKLY TIMER”)
• Setting the timer type
(4) Contact number setting for error situation (“CALL.”)
• Contact number display in case of error
• Setting the telephone number
(5) Temp off set setting (“TEMP OFF SET FUNCTION”)
• Setting the use or non-use of setback amount setting
4. Display change
(“DISP MODE
SETTING”)
(1) Temperature display °C/°F setting (“TEMP MODE °C/°F”)
• Setting the temperature unit (°C or °F) to display
(2) Water temperature display setting (“WATER TEMP DISP
SELECT”)
• Setting the use or non-use of the display of water temperature
6
Function Selection
