– 4 –
The following parts are included in the box.
(1) Field-supplied parts
(2) Required tools
• Flat-tip screwdriver (Width: 4-5.5 mm (5/32-7/32 in))
• Knife or nipper
• Miscellaneous tools
2
Component names and supplied parts
*1 The front cover is already installed on the top case at
factory shipment.
*2 ISO metric screw thread
*3 Remote controller cable is not included.
3
Field-supplied parts/Required tools
Parts name
Qty.
Notes
Double switch box
1
Not required for direct wall installation
Thin metal conduit
As needed
Locknut and bushing
As needed
Cable cover
As needed
Required for routing remote controller cable along a wall
Putty
As needed
Molly anchor
As needed
Remote controller cable
(0.3 mm² (AWG 22) 2-core
sheathed cable)
As needed
If the remote controller cable exceeds 10 m (32 ft), use an
electric wire that meets the following specification.
CVVS: 1.25 mm
2
(standard AWG 16) or equivalent
CPEVS: ø1.2 mm (standard AWG 16) or equivalent
Parts name
Qty.
Remote controller (front cover) *1
1
Remote controller (top case) *1
1
Remote controller (bottom case)
1
Roundhead cross slot screws M4×30 *2
4
Wood screw 4.1×16 *2
(for direct wall installation)
4
Installation Manual (this manual)
1
Instruction book
1
Bottom case
Front cover
Top case
WT06684X01_GB.fm Page 4 Thursday, March 7, 2013 10:23 AM
