Mitsubishi Electric PAR-30MAOA, Инструкция

Страница: 58 / 200

58
Function settings
3
F1 F2 F3 F4
Set / Conf
Sending data
Cursor
Select:
M-NET address
Function No.
Data
Function
3
32
2
3
32
2
M-NET address
Function No.
Data
Function setting
Function setting
Address
The Function setting screen will appear.
Press the F1 or F2 button to move the cursor
to one of the following: M-NET address, function
setting number, or setting value. Then, press the
F3 or F4 button to change the settings to the
desired settings.
Once the settings have been completed, press
the SELECT button.
A screen will appear that indicates that the
settings information is being sent.
To check the current settings of a given unit, enter
the setting for its M-NET address and function
setting number, select Conf for the Function, and
press the SELECT button.
A screen will appear that indicates that the settings
are being searched for. When the search is done,
the current settings will appear.
4
3
32
2
M-NET address
Function No.
Data
Return:
Function setting
Setting completed
When the settings information has been sent, a
screen will appear that indicates its completion.
To make additional settings, press the RETURN
button to return to the screen shown in Step 3
above. Set the function numbers for other indoor
units by following the same steps.
Navigating through the screens
‡
To return to the Service Menu screen ..... MENU button
‡
To return to the previous screen ......... RETURN button