- 4 -
1. Installing the Electric Box (PAC-YG83UTB)
1
Rear installation
To mount the rear of the Electric Box to a structure inside a wall, fix the
Electric Box with the four mounting screws as shown in the right figure.
Select an appropriate type of screws (4 pcs.) to suit the structure type.
Check that the wall is strong enough to support the weight of the Electric Box.
2
Side mounting
Use the four mounting screws to mount the side of the Electric Box to a post
or other building structure.
Select an appropriate type of screws (4 pcs.) to suit the structure type.
Check that the wall is strong enough to support the weight of the Electric
Box.
2. Punch out the knockout holes.
Punch out appropriate knockout holes, depending on how the cables are routed.
5 Installation
CAUTION
Keep the cables from coming in direct contact with the edges of the wire access holes.
If the cables are damaged, they may cause electric shock or fire.
Install a bushing at the end of the conduit tube.
Building structure
Building
structure
Front
Post
Punch out the knockout holes.
(Punch out the appropriate
knockout hole.)
