19
GB
7-1-3. Setting up interlocked units
Sets up interlocked operation of ventilation units in each group. Set up interlocked operation after setting up
the group.
Interlocked units cannot be set up unless indoor units are registered in the desired group.
(1)
Call up the interlocked unit setting screen
(2)
Select the group
(3)
Select the master indoor unit
(4)
Select the interlocked unit address
• Registering the interlocked unit
• Clearing the interlocked unit
• Confirming the interlocked unit
NOTE: • When registering the interlocked unit, always link a interlocked unit to the indoor unit with the
lowest address in the master group. If this is not done it will not be possible to operate the
interlocked unit with the local remote controller.
• When a unit is to be interlocked to multiple indoor units, set up interlocked unit operation for all
indoor units.
(1)
Call up the interlocked unit setting screen
Press the
COL./GROUP
switch to change from the initial setting screen to the interlocked unit setting screen.
ON
COLLECTIVE
GROUP
OFF
CENTRALIZED
AUTO
BY-PASS
HEAT EX.
CHECK
FILTER
PROHIBIT
MODE LOCK
FILTER
SKIP
TEMP.
MODE
ON/OFF
˚C
ON/OFF
ON
COLLECTIVE
GROUP
OFF
CENTRALIZED
AUTO
BY-PASS
HEAT EX.
CHECK
FILTER
PROHIBIT
MODE LOCK
FILTER
SKIP
TEMP.
MODE
ON/OFF
˚C
ON/OFF
Initial setting screen
Interlocked unit setting screen
(initial setting mode screen)
The display toggles between the initial setting screen and the interlocked unit setting screen each time
the
COL./GROUP
switch is pressed.
(2)
Select the group
Press the GROUP
or
switch to select the interlocked unit to be registered.
When the selected group contains and already registered unit, the registered indoor unit with the
lowest address, and its unit type, are displayed.
Example: The indoor unit at address 003 is registered in group 2.
ON
COLLECTIVE
GROUP
OFF
CENTRALIZED
AUTO
BY-PASS
HEAT EX.
CHECK
FILTER
PROHIBIT
MODE LOCK
FILTER
SKIP
TEMP.
MODE
ON/OFF
˚C
ON/OFF
Interlocked unit setting screen (group 2)
[
] or type displayed after two seconds.
[
] or unit address displayed.
[
] or type displayed after two seconds.
Interlocked unit address display.
[
] or unit address displayed.
Unit type [
] displayed after two seconds.
