manualshive.com logo in svg

Mitsubishi Electric NZ2EX2B-60DA4, Руководство пользователя

"Mitsubishi Electric NZ2EX2B-60DA4" - электрический привод с инструкцией по использованию. Пользователи могут бесплатно загрузить руководство по эксплуатации на manualshive.com. Продукт обеспечивает надежную работу и удобство использования. Обязательно загрузите руководство, чтобы быстро начать использование этого качественного устройства.

Поделиться
Скачать
background image

12

TERMS

Unless otherwise specified, this manual uses the following terms.

Term

Description

Buffer memory

A memory in an intelligent function module, where data (such as setting values and monitoring values) 
exchanged with a CPU module are stored

CC-Link IE Field Network

A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)

Cyclic transmission

A function by which data are periodically exchanged among stations on the same network using link devices 
(RX, RY, RWw, and RWr)

D/A converter module

A generic term for the main D/A converter module and extension D/A converter module

Data link

A generic term for cyclic transmission and transient transmission

Dedicated instruction

An instruction that simplifies programming for using functions of intelligent function modules

Disconnection

A process of stopping data link if a data link error occurs

Extension A/D converter module

The abbreviation for the NZ2EX2B-60AD4 CC-Link IE Field Network extension analog-digital converter 
module

Extension analog module

A generic term for the extension A/D converter module and extension D/A converter module

Extension D/A converter module

The abbreviation for the NZ2EX2BN-60DA4 CC-Link IE Field Network extension digital-analog converter 
module

Extension I/O module

A generic term for extension modules where a digital signal can be input or output

Extension input module

A generic term for extension modules where digital signals can be input

Extension module

A remote module with no CC-Link IE Field Network communication function. This module cannot be used as a 
single module. However, connecting the module to the main module will increase the number of I/O points per 
station.

Extension output module

A generic term for extension modules where digital signals can be output

GX Works2

The product name of the software package for the MELSOFT programmable controllers

GX Works3

I/O module

Another name for the CC-Link IE Field Network remote I/O module

Intelligent device station

A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic 
transmission. This station responds to a transient transmission request from another station and also issues a 
transient transmission request to another station.

Link device

A device (RX, RY, RWr, or RWw) in a module on CC-Link IE Field Network

Link special register (SW)

Word data that indicates the operating status and data link status of a module on CC-Link IE Field Network

Link special relay (SB)

Bit data that indicates the operating status and data link status of a module on CC-Link IE Field Network

Local station

A station that performs cyclic transmission and transient transmission with the master station and other local 
stations. The station is controlled by programs in the CPU module or other equivalent modules on the station.

Main A/D converter module

The abbreviation for the NZ2GF2BN-60AD4 CC-Link IE Field Network main analog-digital converter module

Main analog module

A generic term for the main A/D converter module and main D/A converter module

Main D/A converter module

The abbreviation for the NZ2GF2BN-60DA4 CC-Link IE Field Network main digital-analog converter module

Main module

A module with the CC-Link IE Field Network communication function, which can be used as a single remote 
module. Extension modules can be connected to this module.

Master station

A station that controls the entire network. This station can perform cyclic transmission and transient 
transmission with all stations. Only one master station can be used in a network.

Master/local module

The generic term for the CC-Link IE Field Network master/local module

Network module

A generic term for the following modules:

• CC-Link IE Field Network module
• CC-Link IE Controller Network module
• Ethernet interface module
• MELSECNET/H module
• MELSECNET/10 module

Relay station

A station that includes two or more network modules. Data are passed through this station to stations on other 
networks

REMFR

The abbreviation for ZP.REMFR.

Remote buffer memory

Buffer memory in a remote device station

Remote device station

A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic 
transmission. This station responds to a transient transmission request from another station.

Remote I/O station

A station that exchanges I/O signals (bit data) with the master station by cyclic transmission

Содержание NZ2EX2B-60DA4





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NZ2EX2B-60DA4

Panasonic TY-RM50VW Operating Instruction preview
TY-RM50VW
Бренд: Panasonic Страницы: 72
Panasonic CZ-RTC5 Operating Instructions Manual preview
CZ-RTC5
Бренд: Panasonic Страницы: 45
Panasonic CZ-RWSU3 Operating Instructions Manual preview
CZ-RWSU3
Бренд: Panasonic Страницы: 24
Farfisa TD6100 Manual preview
TD6100
Бренд: Farfisa Страницы: 20
Racal Instruments 1266 Manual preview
1266
Бренд: Racal Instruments Страницы: 64
Laird RM186 Hardware Integration Manual preview
RM186
Бренд: Laird Страницы: 38
Laird BL600 Series Application Note preview
BL600 Series
Бренд: Laird Страницы: 5
Yamaha RCX340 Service Information preview
RCX340
Бренд: Yamaha Страницы: 5
Yamaha ACD1 Owner'S Manual preview
ACD1
Бренд: Yamaha Страницы: 20
Yamaha DCP4S-EU Owner'S Manual preview
DCP4S-EU
Бренд: Yamaha Страницы: 2
Lantronix CWDM-CR-B Series User Manual preview
CWDM-CR-B Series
Бренд: Lantronix Страницы: 19
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Бренд: Netafim Страницы: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Бренд: TREND Страницы: 12
DAQ SCXI-1102 User Manual preview
SCXI-1102
Бренд: DAQ Страницы: 63
Vertiv LIEBERT RPC2 Quick Installation Manual preview
LIEBERT RPC2
Бренд: Vertiv Страницы: 2
Quantum NE PLUS Basic Operation Instructions preview
NE PLUS
Бренд: Quantum Страницы: 20
Trane Technologies BAYSTAT033AC Installation Manual preview
BAYSTAT033AC
Бренд: Trane Technologies Страницы: 8
Inkel IRG-8116 Operation Manual preview
IRG-8116
Бренд: Inkel Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды