Mitsubishi Electric NM-C110, Инструкция по установке и эксплуатации

Страница: 14 / 32

- 8 -
z
AE & AWB Setting
For more detailed settings, users can set the white balance and automatic exposure
control. It is possible to designate the basic value according to the types of light or set
it to a full automation mode.
„ White Balance Control
White Balance Mode
When it comes to the White Balance Mode, users should select an illumination mode
similar to that of general weather. Then, it can be set automatically. If users are not
familiar with mode selection, please select the automatic mode.
White Balance range
This function is to prevent the White Balance from leaning to a certain color too much.
If users want to prevent a certain color from getting thick too much at night or dark
places, it would be effective to select the “Wide” mode. In general cases, please select
the “Normal” mode. The default is “Normal” mode.
Set user calibration
Users are allowed to set the White Balance of their own. If users press the “Calibration”
button after having a white background or a sheet of white paper in front of the
NETWORK CAMERA, the White Balance will be adjusted.
„ Auto Exposure Control
Enable Low shutter : Users can use the Low Shutter mode in low light environments.
Select using
-Electronic shutter: For using manual lens.
-DC-IRIS: For using DC-IRIS lens.
Flicker-free : It removes flicker in the 50Hz power zone.(
When it checks this, the
shutter speed is fixed. So it uses ‘Dc-Iris Lens’, it promotes .)