Mitsubishi Electric MXZ-24UV, Руководство по обслуживанию

Страница: 36 / 44

36
OPERATING PROCEDURE PHOTOS
1.Removing the compressor
(1)Remove the screws of the service panel, and remove it.
Recover refrigerant gas.
(2)Remove the screws of the top panel, and remove it.
(3)Remove the screws of the front panel, and remove it.
(4)Disconnect the compressor lead wire.(TAB64,TAB65,TAB66)
(5)Disconnect the electronic control P.C. board connectors
CN791, CN792, CN793, CN722, CN662 and CN661.
Disconnect the noise filter P.C. board connector CN913.
Disconnect the fan motor connector.
(6)Remove the four screws of the electrical parts, and remove
them.
(7)Remove the propeller.
(8)Remove the screws of the separator, and remove it.
(9)Recover gas from the refrigerant circuit.
(10) Detach the brazed joints of the compressor suction and dis-
charge pipes. (See Photo 3.)
(11) Remove the three compressor nuts and remove the com-
pressor.
Photo 1
Top panel
Service panel
Front
panel
Photo 2
Control P.C.board
Electrical parts
Terminal
Discharge pipe
brazed part
MXZ-24UV - , MXZ-24UV -
OUTDOOR UNIT
E2 E1
13
DISASSEMBLY INSTRUCTIONS
Photo 3
Suction pipe
braxed part
Separator
OB287B--2.qxp 06.6.7 11:16 AM Page 36