48
5. Removing outdoor fan motor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Disconnect the following connectors;
<Electronic control P.C. board>
CN931 and CN932 (Fan motor)
(4) Remove the propeller.
(5) Remove the screws fixing the fan motor.
(6) Remove the fan motor.
Photo 7
Propeller
Screws of the outdoor fan motor
OPERATING PROCEDURE
PHOTOS
4. Removing the defrost thermistor, discharge temper-
ature thermistor, outdoor heat exchanger tempera-
ture thermistor and ambient temperature thermistor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Disconnect the following connectors;
<Electronic control P.C. board>
CN661 (Discharge temperature thermistor, defrost
thermistor and outdoor heat exchanger
temperature thermistor)
CN663 (Ambient temperature thermistor)
(4) Pull out the defrost thermistor from its holder.
(5) Pull out the discharge temperature thermistor from its
holder.
(6) Pull out the outdoor heat exchanger temperature thermistor
from its holder.
(7) Pull out the ambient temperature thermistor from its holder.
Photo 5
Photo 6
Defrost
thermistor
Discharge temperature thermistor
Outdoor heat
exchanger
temperature
thermistor
Ambient
temperature
thermistor
Содержание MUZ-GA50VA-E1
Страница 10: ...10 MUZ GA60VA E3 ...