33
OPERATING PROCEDURE
PHOTOS
2. Removing the relay panel.
(1) Remove the cabinet. (Refer to 1)
(2) Disconnect the following connectors.
. Outdoor fan motor
. Solenoid coil (21RB, 21R3, 21R4) <Only MUX-20>
3. Removing the propeller.
(1) Remove the cabinet.
(2) Remove the propeller nut.
(3) Remove the propeller.
Note
: Loosen the propeller in the rotating direction for removal.
When setting the propeller, align the motor-shaft cut
section.
4. Removing the outdoor fan motor.
(1) Remove the cabinet. (Refer to 1)
(2) Remove the propeller. (Refer to 3)
(3) Disconnect the connector remove the clamp of outdoor fan
motor lead wire.
(4) Remove the screws fixing the outdoor fan motor.
Photo 4
Solemoid coil connector
(21RB, 21R3, 21R4)
Relay panel
set screws
Outdoor fan
motor connector
Relay panel
set screws
Clamp
Outdoor fan motor
set screws
Outdoor fan
motor
Propeller
Propeller nut
OB284-2.qxp 01.4.26 9:00 PM Page 33