55
DISASSEMBLY INSTRUCTIONS
12
“
w
” shows the terminals with a lock mechanism,
so they cannot be removed when you pull the
lead wire.
Be sure to pull the wire by pushing the locking
lever (project part) of the terminal with a finger.
1
Slide the sleeve.
2
Pull the wire while pushing the locking lever.
OPERATING PROCEDURE
PHOTOS
1. Removing the electronic control P. C . board.
(1) Pull out the upper part of the grill. ( photo 1 )
(2) Remove the screws of the grill.
(3) Remove screws of terminal block cover.
Remove the terminal block cover and remove the terminal
block.
(4) Remove the screws of the electronic box cover.
(5) Pull out the electronic control P. C. board.
2. Removing the indoor fan motor
(1) Remove the grill. ( Refer to 1(1) (2) )
(2) Remove the screws of the pipe support assembly.
(3) Remove the fan casing.(upper) .
(4) Disconnect the connector of the indoor fan motor.
(5) Disconnect the ground wire of the fan motor.
(6) Remove the screws of the motor band and remove the
catch.
(7) Take out the sirocco fan and the indoor fan motor .
Photo 1
Photo 2
Photo 3
Photo 4
Screws
Electronic box
Fan casing
(upper)
Indoor fan motor
Screws
Fan
casing(upper)
Motor band
Terminal block
12-1.MCFH-13NV-
MCFH-18NV-
MCFH-24NV-
INDOOR UNIT
E3
E3
E4
Electronic control P.C. board
OB267--2.qxp 01.12.19 3:01 PM Page 55