![Mitsubishi Electric MUCF-C13UV-E1 Скачать руководство пользователя страница 37](http://html.mh-extra.com/html/mitsubishi-electric/mucf-c13uv-e1/mucf-c13uv-e1_service-manual_1810844037.webp)
37
DISASSEMBLY INSTRUCTIONS
12
OPERATING PROCEDURE
PHOTOS
1. Removing the electronic control P. C . board.
(1) Pull out the upper part of the grille.
( Photo 1 )
(2) Remove the screws of the grille.
(3) Remove screws of terminal block cover. (Photo 2)
Remove the terminal block cover and remove the terminal
block.
(4) Remove the screws of the electrical box cover.
(5) Pull out the electronic control P.C. board. (Photo 3)
2. Removing the indoor fan motor
(1) Remove the grille. ( Refer to 1(1) (2) )
(2) Remove the screws of pipe support assembly.
(3) Remove the fan casing.(upper).
(4) Disconnect the connector of the indoor fan motor.
(5) Disconnect the ground wire of the fan motor.
(6) Remove the screws of the motor band and remove the
catch.
(7) Take out the sirocco fan and the indoor fan motor.
Photo 1
Photo 2
Photo 4
Screws
Electrical box
Fan casing
(upper)
Indoor fan motor
Screws
Fan
casing(upper)
Motor band
Terminal block
12-1. MCF-C13UV -
MCF-C18UV -
MCF-C24UV -
INDOOR UNIT
E1
E1
E1
(1)
(2)
1
Slide the sleeve.
2
Pull the terminal while
pushing the locking
lever.
1
Hold the sleeve, and
pull out the terminal
slowly.
In the case of terminal with lock mechanism, detach the terminal as shown below.
<"Terminal with lock mechanism" Detaching points>
Photo 3
Grille
Electronic control P.C. board
OB299--2.qxp 02.4.25 10:40 AM Page 37