24
MICROPROCESSOR CONTROL
9
WIRELESS REMOTE CONTROLLER
MCF-C13UV -
MCF-C18UV -
MCF-C24UV -
E1
E1
E1
Once the operation mode are set, the same operation mode
can be repeated by simply turning the OPERATE/STOP
(ON/OFF) button ON.
Indoor unit receives the signal with a beep tone.
When the system turns off, 3-minute time delay will operate to
protect system from overload and compressor will not restart
for 3 minutes.
9-1. “I FEEL CONTROL” ( )OPERATION
(1) Press OPERATE/STOP (ON/OFF) button on the remote
controller. OPERATION INDICATOR lamp of the indoor
unit turns on with a beep tone.
(2) Select “I FEEL CONTROL”( )mode with the OPERA-
TION SELECT button.
(3) The operation mode is determined by the room
temperature at start-up of the operation.
ON/OFF
FAN
TOO
WARM
TOO
COOL
VANE
MODE
STOP
START
HR.
MIN.
I FEEL COOL
DRY
PM
CLOCK
AM
RESET CLOCK
FAN
OPERATION SELECT button
FAN SPEED CONTROL button
OFF-TIMER button
HR. button
MIN. button
(TIME SET button)
ON-TIMER button
RESET button
VANE CONTROL button
CLOCK SET button
ON/OFF
TOO
COOL
PM
AM
TOO
WARM
Signal transmitting section
Operation display section
OPERATE /STOP
(ON /OFF)button
TEMPERATURE buttons
Example
Previous operation
COOL mode of
“I FEEL CONTROL”
or COOL mode
●
Once the mode is fixed, the mode will not change by room
temperature afterwards.
●
Under the ON-TIMER (
)timer operation, mode is
determined according to the room temperature at the set
time the operation starts.
●
When the system is stopped on the remote controller, and
restarted within 2 hours in “I FEEL CONTROL” ( )mode,
the system operates in previous mode automatically
regardless of the room temperature.
Example
Previous operation
COOL mode of “I FEEL
CONTROL” or COOL
mode
●
When the system is restarted after 2 hours and more, the
operation mode is determined by the room temperature at
start-up of the operation.
Restart
COOL mode of
“I FEEL CONTROL”
Restart
COOL or DRY mode of
“I FEEL CONTROL” that
is determined by room
temperature at start-up
of the operation.
Initial room temperature
mode
more than 25°C
COOL mode of
“I FEEL CONTROL”
more than 13°C, less than 25°C
DRY mode of
“I FEEL CONTROL”
lighted
not lighted
Approx. 2
:
or more
Difference
between target
temperature
and room
temperature
Approx. 2
:
or less
This shows that the
air conditioner is
operating to reach
the target temperature.
Please wait until the
target temperature is
obtained.
This shows that the
room temperature is
approaching the
target temperature.
Operation state
Indication
Operation Indicator
Operation Indicator lamp
The operation indicator at the right side of the indoor
unit indicates the operation state.
INDOOR UNIT DISPLAY SECTION
• The following indication applies regardless of shape of
the indicator.
MUCF-C13UV -
MUCF-C18UV -
MUCF-C24UV -
E1
E1
E1
OB299--1.qxp 02.4.25 10:31 AM Page 24