Mitsubishi Electric MSZ-EF18VGB, Руководство по эксплуатации

Страница: 6 / 176

EN-4
● OPERATING INSTRUCTIONS ●
EN
Remote controller
P
REPARATION BEFORE OPERATION
Temperature buttons
Each press raises or lowers the temperature by 1°C.
(AUTO) (COOL) (DRY) (HEAT) (FAN)
Up-down airfl ow control button
FAN speed control button
TIME, TIMER set button
Change the time forward/backward
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
Press (forward) and (backward) to set the time
of timer.
WEEKLY TIMER set buttons
Press to enter the weekly timer setting mode.
Press and to select setting day and number.
Press , , and to set ON/OFF, time, and tem-
perature.
Press to complete and transmit the weekly timer setting.
Press to turn the weekly timer ON. ( lights.)
Press again to turn the weekly timer OFF. ( goes
out.)
OFF/ON (stop/operate) button
Operation select button
Signal transmitting
section
Distance of signal :
About 6 m
Beep(s) is (are) heard
from the indoor unit
when the signal is
received.
Operation
display section
(Backlight
display*)
OFF/ON
(stop/operate)
button
Temperature
buttons
Operation
select button
ECONO
COOL button
FAN speed control
button
VANE control button
TIME, TIMER set
buttons
forward button
backward button
CLOCK button
RESET button
Lid
Slide the lid down
to open the remote
controller. Slide it down
further to get to the
weekly timer buttons.
* The backlight turns on when using the remote controller.
The backlight goes off if the remote controller is not used for a while.
Only use the remote controller provided with the unit.
Do not use other remote controllers.
If 2 or more indoor units are installed in proximity to one another, an indoor unit
that is not intended to be operated may respond to the remote controller.
i-save button
WEEKLY TIMER
set buttons
Battery replacement indicator
(AUTO) (Silent) (Low) (Med.) (High) (Super High)
(AUTO) (1) (2) (3) (4) (5) (SWING)
Left-right airfl ow direction
Move the vertical vane manually before starting operation.
ECONO COOL button
The set temperature and the airfl ow direction are automati-
cally changed by the microprocessor.
i-save button
A simplifi ed set back function enables to recall the preferred
(preset) setting with a single push of the button. Press
the button again and you can go back to the previous set-
ting in an instance.
JG79Y701L02_01En.indd 4 2020/03/16 10:52:02