Mitsubishi Electric MSZ-AS90VGD, Руководство по эксплуатации

Страница: 9 / 20

En-8
I-
SAVE OPERATION
1
Press during COOL, ECONO COOL, NIGHT
MODE, or HEAT mode to select i-save mode.
2
Set the temperature, fan speed, and airflow direction.
• The same setting is selected from the next time by simply pressing
.
• Two settings can be saved. (One for COOL/ECONO COOL, one for
HEAT)
• Select the appropriate temperature, fan speed, and airflow direction
according to your room.
• Normally, the minimum temperature setting in HEAT mode is 16°C.
However, during i-save operation only, the minimum temperature set-
ting is 10°C.
Press again to cancel i-save operation.
• i-save operation also is cancelled when the MODE button is pressed.
Note:
Example of use:
1. Low energy mode
Set the temperature 2°C to 3°C warmer in COOL and cooler in HEAT mode.
This setting is suitable for unoccupied room, and while you are sleeping.
2. Saving frequently used settings
Save your preferred setting for COOL/ECONO COOL and HEAT. This ena-
bles you to select your preferred setting with a single push of the button.
A simplified set back function enables to recall the preferred (preset)
setting with a single push of the button. Press the button again
and you can go back to the previous setting in an instance.
L
ONG OPERATION
Press to start LONG operation.
• Fan speed increases and the horizontal vane moves to the position for
LONG mode.
• Air reaches to longer distance.
Press again to cancel LONG operation.
• LONG operation is cancelled when the OFF/ON, VANE, or ECONO
COOL button is pressed.
Press during COOL or HEAT mode Page 6 to
start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
Press again to cancel POWERFUL operation.
• POWERFUL operation also is cancelled automatically in 15 min-
utes, or when the OFF/ON, FAN, ECONO COOL, or i-save button is
pressed.
P
OWERFUL OPERATION
JG79Y723H02.indd 8 2020/10/26 14:05:44