ASC OFF SWITCH
TSB Revision
ACTIVE STABILITY CONTROL SYSTEM (ASC)
35C-146
15.After turning the electric motor switch to "LOCK"
(OFF) position, turn it to the "ON" position again.
16.On the Menu, select "System selection."
17.On the "System selection," select
"ABS/ASC/ASTC" in the "System table," and then
click the "OK" button.
18. In the "ABS/ASC/ASTC" field, select "Special
function".
19.In the "Special function," select "Learn sensor
neutral position."
20.In "Learn sensor neutral position," select "Learn
neutral position of steering angle sensor," and
then press the "OK" button.
21."Learn neutral position of steering angle sensor:
Are you sure to execute the selected item? Note:
Check the execution conditions." is displayed.
Then, press the "OK" button.
22."Execute command: Executed" is displayed.
Then, press the "OK" button.
23.The neutral point is learned.
24.Turn the electric motor switch to the "LOCK"
(OFF) position, and remove scan tool from the
vehicle.
ASC OFF SWITCH
REMOVAL AND INSTALLATION
M1357003300043
ACA02711AB
1
2
Removal steps
1.
Under cover (Refer to GROUP 52A
-
Instrument Panel Assembly
.)
2.
ASC OFF switch
INSPECTION
M1357004600014
ASC OFF SWITCH CONTINUITY CHECK
ACA01062AB
1. As shown in the figure, connect the circuit tester to the ASC
OFF switch as a single unit.
2. Check the continuity status when the ASC OFF switch is
pressed and when the switch is released.
MSB-20EXML35-501(20AB039)
10
<Deleted>
16.
17.
<Changed>
<Deleted>
Attached sheet 6 (2/2)
