
En-3
• OPERATING INSTRUCTIONS •
Temperature buttons
Page 4
Off-timer button
Page 6
On-timer button
Page 6
TIME set buttons
Pages 3, 6
HR. button
MIN. button
CLOCK button
Page 3
RESET button
Page 3
Lid
Slide down to open
WIDE VANE button
Page 5
Before operation:
Insert the power supply plug into the power outlet and/or turn the breaker on.
Display section
Operation indicator
lamp
Remote control
receiving section
Emergency
operation
switch
Page 4
Remote controller
holder
Signal transmitting
section
Distance of signal :
About 6 m
Beep(s) is (are) heard
from the indoor unit when
the signal is received.
Operation display
section
ON/OFF
(operate/stop)
button
Operation
select
button
Page 4
ECONO
COOL
button
Page 6
FAN speed
control button
Page 5
VANE
control button
Page 5
• Install the remote control-
ler holder to a place where
the signal can be received
by the indoor unit.
Use the remote controller provided with the unit only.
Do not use other remote controllers.
Horizontal vane
Vertical vane
Air outlet
Air filter
(Catechin air filter)
Air inlet
Front panel
Air cleaning filter (Option)
Outdoor unit
Installing the remote controller batteries
Setting current time
N
AME OF EACH PART
P
REPARATION BEFORE OPERATION
1.
Press CLOCK
3.
Press CLOCK again
2.
Press the TIME set buttons to
set the time
Each time
/
is
pressed, the set time increases
by 1 hour/minute.
Indoor unit
Remote controller
Outdoor units may be different in appearance.
LONG
button
Page 6
• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries. The remote controller could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
• Press RESET gently using a thin instrument.
If the RESET button is not pressed, the remote controller may not operate
correctly.
1.
Remove the front lid
2.
Insert AAA
alkaline batteries
3.
Install the front lid
4.
Press RESET
• Press CLOCK gently using a thin instrument.
Air inlet (back and side)
Piping
Drainage hose
Air outlet
Drain outlet
MSH type
MS type
MSH type :
MS type :