Mitsubishi Electric Mr. Slim SLZ-M25, Руководство по эксплуатации

Страница: 9 / 19

9
3. Operation
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
Operation
Main Main menu
F1 F2 F3 F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
<Vane setting>
Fri
Swing Off
Vent. Vane
F1 F2 F3 F4
<Vent. setting>
Fri
Low
Vent.
F1 F2 F3 F4
<Returning to the Main menu>
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1 F2 F3 F4
Select “Operation” from the Main
menu (refer to 3.5.1), and press the
[SELECT] button.
Select “Vane·Louver·Vent.
(Lossnay)” from the Operation
menu, and press the [SELECT]
button.
Press the [RETURN] button to go
back to the Operation menu.
Press the [F3] button to go through
the ventilation setting options in the
order of “Off”, “Low”, and “High”.
* Settable only when LOSSNAY unit
is connected.
Off Low High
Off Low High
• The fan on some models of indoor
units may be interlocked with
certain models of ventilation units.
Reset 1
horizontal
2 3 4 5
Note:
The outlet No. is indicated by the number of grooves on both ends of
each air outlet. Set the air direction while checking the information
shown on the remote controller display.
Horizontal air fl ow
Downward
Outlet No.4
Electric Component box
Outlet No.1
Air outlet identi fi cation marks
Outlet No.3 Outlet No.2
Remote controller setting
The air fl ow direction of this outlet
is controlled by the air fl ow direc-
tion setting of remote controller.
Fixed
The air fl ow direction of this outlet is fi xed
in particular direction.
* When it is cold because of direct
air fl ow, the air fl ow direction can be
fi xed horizontally to avoid direct air fl ow.
< How to set the fi xed up/down air direction >
Notes:
●
This function cannot be set depending on the outdoor unit to be
connected.
• For SLZ-M.FA-A series, only the particular outlet can be fi xed to certain
direction with the procedures below. Once fi xed, only the set outlet is
fi xed every time air conditioner is turned on. (Other outlets follow UP/
DOWN air direction setting of remote controller.)
■
Explanation of word
• “Refrigerant address No.” and “Unit No.” are the numbers given to
each air conditioner.
• “Outlet No.” is the number given to each outlet of air conditioner.
(Refer to the illustration below.)
• “Up/Down air direction” is the direction (angle) to fi x.
Press the [F1] or [F2] button to go
through the vane setting options:
"Auto", "Step 1", "Step 2", "Step 3",
"Step 4", "Step 5", and "Swing."
Select the desired setting.
Auto
Swing
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
5", the vane will be
fi xed at the
selected angle.
Auto
Step 3
Swing
Step 1
Step 4
Step 2
Step 5
Notes:
●
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
●
Available directions depend on the type of unit connected.
●
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in “STAND BY” or “DEFROST” states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem-
perature setting.
VG79Y135H01_EN.indd 9 VG79Y135H01_EN.indd 9 10/15/2562 BE 9:14 AM 10/15/2562 BE 9:14 AM