![Mitsubishi Electric Mr.Slim PLA-RP3AA Скачать руководство пользователя страница 76](http://html.mh-extra.com/html/mitsubishi-electric/mr-slim-pla-rp3aa/mr-slim-pla-rp3aa_service-manual_1810243076.webp)
76
OPERATING PROCEDURE
PHOTOS & ILLUSTRATIONS
10. Removing the heat exchanger
(1) Remove the panel. (See photo 6)
(2) Remove the fan guard. (See photo 1)
(3) Remove the bell mouth. (See photo 2)
(4) Remove the electrical box. (See photo 3)
(5) Remove the drain pan. (See photo 7)
(6) Remove the turbo fan. (See photo 4)
(7) Remove the 3 screws of the piping cover, and pull out
piping cover.
(8) Remove the 4 screws of the outer wall cover, and pull out
the outer wall cover.
(9) Remove the screw of the coil support.
(10) Remove the 2 screws of the coil.
(11) Pull out the heat exchanger.
9. Removing the drain pump and drain sensor
(1) Remove the panel. (See photo 6)
(2) Remove the fan guard. (See photo 1)
(3) Remove the bell mouth. (See photo 2)
(4) Remove the electrical box. (See photo 3)
(5) Remove the drain pan. (See photo 7)
(6) Remove the 3 screws of the drain pump.
(7) Cut the drain hose band, pull out the drain hose from the
drain pump.
(8) Pull out the drain pump.
(9) Remove the drain sensor and the holder.
Photo 8
Screw
Screw
Drain sensor
Drain pump
Drain hose
Fixing band
Photo 9
Photo 10
Heat exchanger
Coil
support
Coil screws
Coil support
Coil
support
Screw
Outer wall cover
Piping cover
Screws of
piping cover
OC297-E-3.qxp 05.5.6 5:36 PM Page 76