background image

6

3.1. Cleaning the filters and the indoor unit

Care and cleaning

• Be sure to turn the ON/OFF switch to the OFF position before proceed-

ing with care and handling of the unit.

Cleaning the indoor unit

• Wipe the unit with a dry, soft cloth.
• Do not attempt to pull the vertical air vanes forcibly by hands to prevent

possible damage or malfunction.

• Use a household detergent (for tableware cleaning or cloth washing) to

remove fingerprint and oil stains.

• Do not use gasoline, benzine, thinner, and polishing powder which could

damage the unit.

3. Care and cleaning

A

B

A

C

B

Removing the air filter

Be sure to check on the location and the way of setting with the contractor
when the unit performs a trial run.

A

Air intake

B

Filter

C

Screw (Only RP·EA)

Cleaning filters

• Air filter cleaning method varies according to filter material. Read in-

struction concerning filter material and cleaning method carefully. Gen-
eral method for cleaning filters is shown below.

• Tap lightly or clean with vacuum cleaner. Rinse in water or neutral deter-

gent dissolved in lukewarm water if filters are especially dirty. Be sure to
throughly rinse off any detergent used.Dry before reinstalling into air
conditioner.

 Caution:

• Do not dry filters  in direct sunlight or by other heat sources. Heat

may disfigure filters.

• Washing in hot water (over 50

°

C) may disfigure filters.

Содержание Mr. Slim PEAD-RP EA











Отзывы: