Mitsubishi Electric Mr. SLIM PEA-M100GAA, Руководство по эксплуатации

Страница: 10 / 16

10
4. Timer
■
Timer functions are different by each remote controller.
■
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
4.1. For wireless remote controller (option)
AAA
AAA
CLOCK
CHECK
RESET SET
TEST RUN
MODE
FAN
VANE
LOUVER
min
h
AUTO START
AUTO STOP
ON/OFF
TEMP
13
2
D
A
C
B
1) Set the current time
1
Press the CLOCK button using a thin stick and blink the time
A
.
2
Press the
h
and
min
button to set the current time.
3
Press the CLOCK button using a thin stick.
2) Set the time to start the unit as follows
1
Press the
AUTO START
button.
• Time can be set while the following symbol is blinking.
On time:
B
START is blinking.
• The start times is displayed at
A
.
2
Use the
h
and
min
buttons to set the desired time.
3
To cancel the ON timer, press the
AUTO START
button.
3) Set the time to stop the unit as follows
1
Press the AUTO STOP button.
• Time can be set while the following symbol is blinking.
Off time:
C
STOP is blinking.
• The stop times is displayed at
D
.
2
Use the h and min buttons to set the desired time.
3
To cancel the OFF timer, press the AUTO STOP button.
4) Changing the set times
Press the
AUTO START
or
AUTO STOP
to cancel the timer and repeat from 2) or 3).
ON/OFF
HEAT COOL
2
1
1
ON/OFF lamp (lit when unit is operating; unlit when unit is not
operating)
2
Emergency operation
In cases where the remote control unit does not operate properly, use
either the COOL or HEAT button on the wireless remote control
signal receiver to toggle the unit on or off. On cooler only units,
pushing the HEAT button toggles the fan on and off.
Pressing the COOL or HEAT button selects the following
settings.
Operation mode COOL HEAT
Preset temperature 24 °C/75 °F 24 °C/75 °F
Fan speed High High
5. Emergency Operation for Wireless Remote-controller (option)