21
DISASSEMBLY INSTRUCTIONS
9
(1) Slide the sleeve and check if there is a locking lever or not.
(2) The terminal with this connector has the
locking mechanism.
1
Slide the sleeve.
2
Pull the terminal while
pushing the locking
lever.
1
Hold the sleeve, and
pull out the terminal
slowly.
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
<"Terminal with locking mechanism" Detaching points>
Connector
Sleeve
Locking lever
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet
(1) Remove the screws of the cabinet.
(2) Hold the bottom of the cabinet on both sides to remove the
cabinet.
(3) Remove the screws of the service panel and remove the
service panel.
(4) Remove the screw of the valve cover and remove the valve
cover
(MU-A18ND-
).
S2
9-1. MU-A18ND
OUTDOOR UNIT
Photo 1
Photo 2
Screws
of the
cabinet
Screw of
the valve
cover
Screws
of the
Service
panel
Photo : MU-A18ND -
S2
Screws
of the
cabinet
OB405E.qxp 09.10.14 9:16 AM Page 21
