En-5
●
OPERATING INSTRUCTIONS
●
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT
Press
to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
Press
to select air
fl
ow direction. Each press
changes air
fl
ow direction in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
• Mechanical relay sound is heard from electronic control P.C. board,
when each press changes fan speed isn’t abnormal.
Airflow direction
(AUTO) .........The vane is set to the most ef
fi
cient air
fl
ow direction.
Floor standing unit:
COOL/DRY: upward. FAN: horizontal.
Ceiling suspended unit:
COOL/DRY: horizontal. FAN: downward.
(Manual) ..For efficient air conditioning, select position
1
or
2
for COOL/
DRY. During COOL/DRY, when the vane is set to position
4
or
5
, vane automatically moves to position
1
after 1 hour to
prevent water dripping.
(Swing) .........The vane moves up and down intermittently.
■
To change the horizontal air
fl
ow direction.
Move the vertical vane manually before starting operation.
1
Press
or
during operation to set the timer.
(ON timer) : The unit will turns ON at the set
time.
(OFF timer) : The unit will turns OFF at the
set time.
*
or
blinks.
* Make sure that the current time is set correctly.
Page 3
2
Press
(Increase) and
(Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
or
is blinking.
3
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
• If power failure occurs while ON/OFF timer is set, see
page 4
“Auto restart
function”.
TIMER OPERATION (ON/OFF
TIMER)
(AUTO)
(Low)
(Med.)
(High)
(AUTO)
(SWING)
Floor standing unit
Ceiling suspended unit
