26
Problem
Check
Explanation and Action
1
There are lines
like scratches on
the clear parts
1
Is it a thin line without level difference on
its both sides?
This is a mark created at the time the plastic is molded. It is
created at the joint where resin flows. This is not a flaw.
There are holes
in the door and
the refrigerator
walls
1
Are there small holes in the door or in the
refrigerator walls?
These are holes that let air escape for the injection of foam
heat insulating materials in the manufacturing process.
These are not flaws or abnormalities.
The surface of
the sides or
doors is warped
1
Does the light reflected on the surface
appear distorted?
Warping and surface waviness occurs in the manufacturing
process. When light hits the surface, it may appear warped,
but this is not an abnormality.
Noise interferes
with televisions
or other devices
1
Is the refrigerator installed near an
electronic device such as a television?
Install the refrigerator away from electronic devices such as
televisions.
2
Is the power to the refrigerator supplied
from a socket near the entry hole of the
antenna cable?
Use separate power. When using a 2 pin plug, use
grounding.
There is a
bothersome
smell (Food / Ice)
1
Have you placed food with strong odor
inside the refrigerator without sealing it
in a container?
Store food with strong odor in packaging.
The odor may not be removed with a deodorizing apparatus.
2
Do you periodically clean the water tank?
Clean periodically.
Page 18
Other
s
Troubleshooting
(Continued)
Troubleshooting
(Continued)
