&
0QFSBUJOH
Draining
Tank full is notified by the lighting of a lamp and a sound.
Empty the tank.
When the tank becomes full, the FULL lamp lights.
FULL lamp lights.
(The unit beeps continuously until the water is
drained from the tank.)
Stops dehumidification and only blows air.
*OGPSNBUJPO
After draining the water and replacing the
tank, the FULL lamp will go off, and the unit
will automatically return to operation mode.
If the operation mode is changed while
the FULL lamp is lit, the operation mode
lamp indication goes out and you can no
longer operate the unit except for turning
operation ON and OFF.
The FULL lamp lights up during Off Timer
operation but no sound plays.
3FNPWFUIFXBUFSUBOL
Hold the handle and
gently pull out.
If you remove the tank, the FULL lamp lights.
<Hold the tank this way>
3FNPWFUIFUBOLMJEBOEQPVS
PVUUIFXBUFS
5BOLMJE
'MPBUJOHFMFNFOU
Do not remove this.
Pour the water
out as shown.
4MJEFUIFUBOLMJEUPDMPTFUIF
UBOL
Check the
orientation
of the tank
lid and firmly
push all the
way in.
5BC
Insert the tank lid
under the tabs.
8IJMFIPMEJOHUIFVOJUàSNMZ
QVTIUIFUBOLBMMUIFXBZJO
5BOL
Make sure the tank is not
broken or cracked
"CFFQJTIFBSEBOEUIF'6--MBNQUVSOT
PGG
*OGPSNBUJPO
Firmly push the tank lid into place; failure to do so
could cause water to leak.
If the tank lid is not firmly fitted in, it may be difficult
to remove the tank.
If the tank is not inserted correctly, the FULL lamp
comes on and the unit will not operate.
/PUF
Do not remove or dismantle the floating element in the
tank. If it is removed, the unit cannot detect when the
tank is full, and this could result in leakage.
