17
Oper
ating
E
Setting OFF TIMER
1
Switch the power ON.
z
Select operation mode.
P10–14
z
Select the louvre swing direction.
P16
2
Blip
Press
Set the operation
time.
z
Press once to display “ ” “
”.
z
Each press will change the display in
the sequence of 1 to 9 hours.
(Holding the switch will cause the display to
change continuously.)
......
Blip
Blip
Blip Blip
No display
→
The OFF TIMER is set.
z
The remaining time will decrease one
hour after each hour elapses.
z
When the set time is reached, the unit stops
automatically and the louvre closes automatically.
DRYING INSIDE (auto) operation will start if it
has been activated. P18
Cancellation
<When you want to stop operation>
Press POWER switch
g
OFF
<When you want to disable the OFF
TIMER mode and continue operation>
Press and hold the ON/OFF TIMER switch until
the remaining time disappears from the display.
Setting ON TIMER
1
Switch the power OFF.
2
Set the time you
wish the unit to
turn ON.
z
Press once, the operation mode
indicator and “ ” on the digital display
flash, and “
” is displayed.
z
Each press will change the display in
the sequence of 1 to 9 hours.
(Holding the switch will cause the display to
change continuously)
......
Blip
Blip
Blip Blip
No display
z
Select operation mode.
P10–14
Set the DRYING INSIDE (auto) operation as
desired. P18
z
Select the louvre swing direction.
P16
3
Confirm the time
setting by pressing
the POWER switch.
z
The timer display lights.
g
The ON TIMER is set.
If both the timer display and operation mode indicator
blink, it means the POWER switch is not pressed.
(An alarm “blip blip” sounds for 1 minute.)
z
The remaining time will decrease one
hour after each hour elapses.
z
When the set time is reached, the
unit automatically starts.
Cancellation
Press POWER switch
g
OFF
Inf
or
mation
z
When the ON TIMER is set during the DRYING
INSIDE operation, the operation is stopped.
z
The ON TIMER function is not operable using a
commercially-available timer plug.
Blip
Press
Blip
Press
OFF TIMER operation
The OFF TIMER can be set between 1 to 9 hours. Set
the timer when the power is switched on.
2 1
Using Timer
Inf
or
mation
z
Empty the water tank before operating. During operation, if the
tank becomes full, the FULL lamp lights and the unit stops.
z
The OFF TIMER and ON TIMER cannot be set at the same time.
z
If the OFF TIMER mode is used with the INTELLIGENT
LAUNDRY, NIGHT LAUNDRY or MILDEW GUARD, the unit may
stop before the laundry or the bathroom is dry.
z
The OFF TIMER cannot be set during DRYING INSIDE operation.
2
1 . 3
ON TIMER operation
The ON TIMER can be set between 1 to 9 hours.
Set the timer when the POWER is off.
e_mj_e100ar_h_cs55j.indd 17
2020/07/27 15:35:11