Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/D, Руководство пользователя

Страница: 135 / 202

7 OPERATION ADJUSTMENT
7.1 Preparation for Operation
133
7
7.
Reboot the system.
Reboot the system by any of the following methods.
• Turning off and on the power
• Resetting the CPU module (
 Page 135 Resetting method)
8.
Check errors.
Check the ERR LED of the CPU module. If an error has occurred, check the contents of the error with Module Diagnostics
(CPU Diagnostics) of the engineering tool and eliminate its cause.
9.
Run the program.
Set the CPU module to the RUN status and make sure that the P.RUN LED of the CPU module lights up.
Connection with a personal computer
Connect the CPU module with a personal computer on which an engineering tool has been installed.
The system configuration examples and GX Works3 settings are described below.
For details, refer to

GX Works3 Operating Manual.
Direct connection
Setting examples for accessing the CPU module that is directly connected with a personal computer are shown below.
■
Ethernet connection
• Ethernet port direct connection
GX Works3 settings
For the FX5 CPU module, the Ethernet adapter on the personal computer side used for the Ethernet port
direct connection can be specified. Click the [CPU Module Direct Coupled Setting] button on the "Specify
Connection Destination Connection" window to display the "CPU Module Direct Coupled Setting" window.
Select the adapter on the window.
• Connection via HUB
GX Works3 settings
No. Item Selection item Internal setting Input value
1) PC side I/F Ethernet Board
 
2) PLC side I/F PLC Module Ethernet Port Direct Connection
Other Station Setting No Specification Check at Communication Time 30 seconds
Retry Times 0 times
No. Item Selection item Internal setting Input value
1) PC side I/F Ethernet Board
 
2) PLC side I/F PLC Module Connection via HUB IP Address 192.168.0.2
Response Waiting Time 2 seconds
Other Station Setting No Specification Check at Communication Time 30 seconds
Retry Times 0 times
Built-in
Ethernet
1) 2)
Ethernet port
Ethernet cable
1)
2)
Built-in Ethernet
(192.168.0.2)
Hub