English-29
English
U-1
Turning on all the connected devices
Wireless remote
control
Power Indicator
Status
LED
Power ON
Green
Power OFF
Red
Power Standby when
“SCHEDULE” is enable
Red On
Green Blinking
Sleep mode
Red, Green
Diagnosis (Detecting failure)
Red Blinking
* See troubleshooting on page 55.
Turning on external devices
1. Turn on the connected devices such as
the computer and VCR.
Turning on the monitor
2. Turn on the Main Power Switch.
The power indicator turns on green.
The control buttons on the rear of the monitor and the
wireless remote control don’t work while the Main Power
Switch is off (the power indicator is off).
When using them, check that the Main Power Switch is on
(the power indicator is on).
3. When the power indicator glows
red, press the POWER button on the
monitor.
The power indicator turns green.
Power Management Function
This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a fi xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
When the power saver in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (RGB1, 2, 3, 4,
OPTION, or RGB6) is terminated, the monitor will be in
the sleep mode in several seconds.
VIDEO: When the sync signal of video input (DVD/HD, VIDEO<S>,
or VIDEO) is terminated, the monitor will be in the sleep
mode in approximately 10 minutes.
[Description]
DPM: Acronym for Display Power Management
NOTE:
The default power management settings (power savers) for
RGB and VIDEO are ON.
Power button
Power button
Main Power Switch
or
