Mitsubishi Electric Jet Towel JT-MC106G-W-NA, Руководство по установке, Страница: 3 / 32

English
− NA - 3 −
Pre-installation checks
Input Power: 120 Vac Single-phase is used.
Using the incorrect power supply may cause fi res, electric shocks or malfunctions.
■
Checking the installation environment
Do not install the unit in the following types of locations.
(This may cause malfunctions.)
Outdoors Locations where the temperature could be lower than 32 F (0 C).
Locations where there is a lot of dust. Locations where the temperature could be higher than 104 F (40 C).
Locations where there is a lot of condensation. Locations where salt damage may occur.
Locations where the unit is in direct or strong sunlight (may cause the sensor to malfunction) .
In vehicles (including ships and airplanes)
Locations where corrosive, neutral or reductive gasses are present.
(This may shorten the working life of the unit and/or cause malfunctions.)
Near food or tableware Locations where the unit may come into direct contact with water.
Kitchens
(Where there is a risk of water splashing.)
Rooms that have a sterilization basin, swimming pools and baths.
■
Checking the unit, accessories and items required for installation
※
Shaded areas in the fi gure indicate antibacterial material (excluding outlet nozzle areas).
Main unit
Air fi lter
Open
Lid
Drain tank
How to open/close the front cover
(refer to Page 13)
Mounting screws 7
(5 × 30 Type 1 tapping screws)
Installation panel 1
Cord clip mounting screw
(4
×
14) 1
Cord clip 1
Screwdriver Pen
Screw anchor 7 Wall reinforcement
※ To mark position to insert metal
screw plugs in the wall.
※ Use on concrete walls ※ Reinforces walls made of
materials other than concrete.
■ Prepare if required
※ Not needed if the internal wiring is
complete.
Single wire for internal wiring
(Cable core: between 2.0mm² and 3.0mm²)
Warning
Front cover
Unit
Recommended tools and hardware to be used for installation
Accessories