background image

English

NA 

-

 4

How to use the unit

How to open/close the front cover  

1

 Pull the tab for opening the 

front cover.

2

 Hold the handle are on the 

right hand side of the main 
unit.

3

 Open.

Close the front cover with the procedures for 
opening it in reverse.

Close the front cover so that there 
is no gap between the front cover 
and the main unit and push the tab 
in to latch the front cover shut.

NOTE

Check to see that the front cover is fitted securely.

Press the front cover on the upper and lower parts 
against the main unit so that it is securely closed.

Main 
unit

Main 
unit

Gap

Close the right side

Close the left side (both the 

upper and lower parts)

Front 
cover

Front 
cover

Tab

Main 

unit

Front cover

Handle

Open

Precautions for when opening/closing the front cover

If the front cover comes off, please reattach it with the 
following procedures.

It is designed to come off in order to prevent damage if it 

is opened too wide.

1

 Press the bottom connecting part of the 

removed front cover into the bottom panel 
hook of the unit.

2

 Press the top connecting part of the front 

cover into the top panel hook of the unit.

3

 Check that the front cover is fi tted securely.

Click

Gap

Connecting 
part of the 
front cover

Panel 
hook of 
the unit

Make sure that there is no gap 
between the front cover and the 
unit when the front cover is closed.

Pull

Tab

Push

How to close the front cover

How to open the front cover

Содержание Jet Towel JT-MC106G-W-NA













Отзывы: