EN-27
3. FEATURE menu
FE A TURE
AUTO
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OFF
AUTO
OK
DISPLAY
INPUT
PASSWORD
FUNCTION
1.
MENU DIMMER
A V MEMO R Y 1
SETUP
SCART INPUT
OFF
Menu operation (continued)
3. FEATURE menu
ITEM
SETTING
FUNCTION
ASPECT
AUTO
Select to change the aspect ratio automatically depending on the input signal.
4:3
Select to project images with an aspect ratio of 4:3.
16:9
Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1
Select to enlarge and project images of CinemaScope size.
ZOOM2
Select to enlarge and project images of Vista size.
STRETCH
Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
(Non-linearly stretched.)
PASSWORD FUNCTION
Use to enable or cancel the password lock. See page 34 for details.
MENU POSITION
2 options
Use to change the position of the menu.
MENU DIMMER
ON / OFF
Use to reduce the brightness of the menu.
CINEMA MODE
AUTO
The fi lm mode will be automatically activated when a fi lm source signal is input.
OFF
The fi lm mode will not be activated.
VIDEO SIGNAL
8 options
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn’t displayed correctly, select the
desired video format manually.
SETUP
AUTO
Select AUTO for normal use. When LANGUAGE is not set to
and 480i,
480p or TV60 signal is input, the SETUP changes to 7.5% automatically.
OFF
Select to make black lighter.
3.75% / 7.5%
Select to make black intense.
When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
•
SCART INPUT
ON / OFF
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER IN/COMPONENT VIDEO IN terminal.)
LANGUAGE
10 languages
Use to select the language used in the menus.
RESET ALL
OK
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
When SCART INPUT is set to ON, normal computer signals aren’t projected.
Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
Some AV devices equipped with the SCART terminal aren’t compatible with this projector.
It may take a little while to carry out RESET ALL in the FEATURE menu.
•
•
•
•
