manualshive.com logo in svg

Mitsubishi Electric HC5000, Руководство пользователя

Mitsubishi Electric HC5000 - проектор ультра-высокой четкости с удивительным качеством изображения. Спецификации и инструкции по эксплуатации доступны для бесплатного скачивания на manualshive.com. Получите руководство пользователя сейчас, чтобы насладиться потрясающим видео в вашем доме или офисе.

Поделиться
Скачать
background image

EN-18

POWER button

To stop projecting:

Press the POWER button on the projector or the OFF (

) button on the remote control.

A confi rmation message is displayed.
To cancel the procedure, leave the projector for a while or press the MENU button.

Press the POWER button on the projector or the OFF (

) button on the remote control again.

The lamp goes out and the projector goes into a standby mode. In this standby mode, the STATUS indicator 
blinks green.

Wait about 2 minutes.

During this period of 2 minutes in the standby mode, the intake fan and exhaust fan rotate to cool the lamp.
The lamp can’t be lit again for 1 minute after turning off the projector for safety purpose. It will take another 1 
minute for the STATUS indicator to go out. If you want to turn on the projector again, wait until the indicator 
goes out, and then press the POWER button.
The air outlet fans rotate faster as the temperature around the projector rises.
Do not unplug the power cord while the STATUS indicator is blinking. Unplugging the power cord immediately 
after use may cause a lamp breakdown.
Though the fan makes loud sound during cooling, such symptom is not a malfunction.

Unplug the power cord from the outlet.

The POWER indicator will go out.
If the power cord should be unplugged accidentally while either the air inlet fan or the air outlet fans are 
operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the 
lamp again, press the POWER button. If the lamp doesn’t light up immediately, repeat pressing the POWER 
button two or three times. If it should still fail to light up, replace the lamp.
Cover the lens with the lens cap to protect it from dust.

12.

•
•

13.

•

14.

•
•

•
•

•

15.

•
•

•

OFF (

) button

Viewing video images (continued)

Содержание HC5000














































Отзывы:

Нет отзывов

Похожие инструкции для HC5000

Lampo IP65 User Manual preview
IP65
Бренд: Lampo Страницы: 2
Panasonic PT-VW440U Operating Instructions (Functional Manual) preview
PT-VW440U
Бренд: Panasonic Страницы: 100
BenQ MP622 - XGA DLP Projector Specifications preview
MP622 - XGA DLP Projector
Бренд: BenQ Страницы: 2
Retual PERMW2415ENC User Manual preview
PERMW2415ENC
Бренд: Retual Страницы: 7
Draper FocalPoint Instructions preview
FocalPoint
Бренд: Draper Страницы: 2
ACCO Brands NOBO S18E User Manual preview
NOBO S18E
Бренд: ACCO Brands Страницы: 31
Elite Screens Ez-Electric Screen User Manual preview
Ez-Electric Screen
Бренд: Elite Screens Страницы: 12
B&B Electronics IASP1P Product Information preview
IASP1P
Бренд: B&B Electronics Страницы: 1
Epson 455 Operation Manual preview
455
Бренд: Epson Страницы: 11
Epson 5350 - EMP SVGA LCD Projector Specifications preview
5350 - EMP SVGA LCD Projector
Бренд: Epson Страницы: 2
Epson 402169004 Safety Instructions preview
402169004
Бренд: Epson Страницы: 52
Epson 5000XB - PowerLite SVGA LCD Projector User Manual preview
5000XB - PowerLite SVGA LCD Projector
Бренд: Epson Страницы: 124
Epson 5510 - EMP 7250 XGA LCD Projector Owner'S Manual preview
5510 - EMP 7250 XGA LCD Projector
Бренд: Epson Страницы: 128
Epson 5550C - PowerLite SVGA LCD Projector User Manual preview
5550C - PowerLite SVGA LCD Projector
Бренд: Epson Страницы: 178
Epson 5350 - EMP SVGA LCD Projector User Manual preview
5350 - EMP SVGA LCD Projector
Бренд: Epson Страницы: 182
Epson Dreamio EMP-TW10 User Manual preview
Dreamio EMP-TW10
Бренд: Epson Страницы: 100
Epson 5550C - PowerLite SVGA LCD Projector Specifications preview
5550C - PowerLite SVGA LCD Projector
Бренд: Epson Страницы: 2
Sharp Notevision PG-A20X Operation Manual preview
Notevision PG-A20X
Бренд: Sharp Страницы: 74

Бренды по названию

Популярные бренды

Загрузить еще бренды