Mitsubishi Electric GT14, Руководство пользователя

Страница: 442 / 1546

22 - 26
22. COMPUTER LINK CONNECTION
22.5 PLC Side Setting
22.5 PLC Side Setting
The GOT operates under the following transmission
specifications when it is connected to a Mitsubishi PLC in
the computer link connection.
The PLC side settings (the serial communication module,
computer link module) are explained in Section 22.5.2 to
Section 22.5.4.
22.5.1 Connecting serial
communication module
(MELSEC iQ-R Series)
POINT POINT POINT
Serial communication module (MELSEC iQ-R Series)
For details of the serial communication module
(MELSEC iQ-R Series), refer to the following
manual.
Manuals of MELSEC iQ-R Series

[Module parameter] of GX Works3
The PLC can communicate with the GOT with the
default module parameter setting.
(1) Module parameter
POINT POINT POINT
(1) When changing the module parameter
After writing module parameters to the PLC CPU,
turn the PLC CPU OFF then back ON again, or
reset the PLC CPU.
(2) Connection of multiple GOTs
To some serial communication module models,
two GOTs can be connected using both CH1 and
CH2.
Transmission specifications Settings
Data bit 8bits
Parity bit Yes (Odd)
Stop Bit 1bit
Sum Check Enable
Transmission speed
Set the same transmission speed on
both the GOT and the PLC.
Model Refer to
Serial communication module
(MELSEC iQ-R Series)
RJ71C24,
RJ71C24-R2,
RJ71C24-R4
22.5.1
Serial communication module
(Q Series)
QJ71C24N,
QJ71C24
22.5.2 QJ71C24N-R2,
QJ71C24-R2
QJ71C24N-R4
Modem interface module
QJ71CMO,
QJ71CMON
22.5.2
Serial communication module
(L Series) LJ71C24,
LJ71C24-R2
22.5.2
Serial communication module
(QnA Series)
AJ71QC24N,
AJ71QC24
22.5.3
AJ71QC24N-R2,
AJ71QC24-R2
AJ71QC24N-R4,
AJ71QC24-R4
A1SJ71QC24N1,
A1SJ71QC24N,
A1SJ71QC24
A1SJ71QC24N1-R2,
A1SJ71QC24N-R2,
A1SJ71QC24-R2
Computer link module
AJ71UC24 22.5.4
A1SJ71UC24-R2,
A1SJ71UC24-PRF,
A1SJ71C24-R2,
A1SJ71C24-PRF
22.5.4
A1SJ71UC24-R4,
A1SJ71C24-R4
22.5.4
A1SCPUC24-R2 22.5.4
A2CCPUC24,
A2CCPUC24-PRF
22.5.4