Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 341 / 484

340
14. (C) Motor Constant Parameters
14.1 Applied motor
14
(C) Motor Constant Parameters
14.1
Applied motor
By setting the applied motor type, the thermal characteristic appropriate for the motor can be selected.
When using a constant-torque or PM motor, the electronic thermal O/L relay function is set according to the motor.
When the Advanced magnetic flux vector control, Real sensorless vector control, Vector control, or PM sensorless vector
control is selected, the motor constant necessary for control (for SF-PR, SF-PR-SC, SF-JR, SF-HR, SF-JRCA, SF-HRCA, SF-
V5RU (1500 r/min series), GM-[], GM-DZ, or GM-DP) is also selected at the same time.
*1 The setting range for the 575 V class is "0, 3, 5, 6, 10, 13, 15, 16, 30, 33, 8090, 8093, 9090, and 9093".
Purpose Parameter to set Refer to page
To select the motor to be used Applied motor P.C100, P.C200 Pr.71, Pr.450 340
To maximize the performance of the
induction motor
Offline auto tuning
P.C100 to P.C105,
P.C107, P.C108,
P.C110, P.C120 to
P.C126, P.C182,
PC188, P.C200 to
P.C205, P.C207,
P.C208, P.C210,
P.C220 to P.C226,
P.C282, P.C288
Pr.9, Pr.51, Pr.71,
Pr.80 to Pr.84, Pr.90 to
Pr.94, Pr.96, Pr.450,
Pr.453 to Pr.463,
Pr.707, Pr.717, Pr.720,
Pr.724, Pr.737, Pr.741,
Pr.744, Pr.745, Pr.859,
Pr.860
345
To maximize the performance of the
PM motor PM motor offline auto
tuning
P.C100 to P.C108,
P.C110, P.C120,
P.C122, P.C123,
P.C126, P.C130 to
P.C133, P.C135,
P.C150, P.C182,
P.C185, P.C200 to
P.C208, P.C210,
P.C220, P.C222,
P.C223, P.C226,
P.C230 to P.C233,
P.C235, P.C282,
P.C285 Pr.9, Pr.51, Pr.71,
Pr.80, Pr.81, Pr.83,
Pr.84, Pr.90, Pr.92,
Pr.93, Pr.96, Pr.450,
Pr.453, Pr.454, Pr.456
to Pr.458, Pr.460,
Pr.461, Pr.463, Pr.702,
Pr.706, Pr.707, Pr.711,
Pr.712, Pr.717, Pr.721,
Pr.724, Pr.725, Pr.738
to Pr.746, Pr.859,
Pr.860, Pr.1002,
Pr.1412, Pr.1413
355
To perform high accuracy operation
without being affected by temperature
and high-torque/ultra-low speed
Online auto tuning P.C111, P.C211 Pr.95, Pr.574 362
To use the motor with encoder
Encoder
specifications
P.C140, P.C141 Pr.359, Pr.369 365
To detect loss of encoder signals Signal loss detection P.C148 Pr.376 368
Pr. Name Initial value Setting range Description
71
C100
Applied motor 0
0, 3, 5, 6, 10, 13, 15, 16, 20, 23,
30, 33, 40, 43, 50, 53, 70, 73,
1800, 1803, 8090, 8093, 9090,
9093
*1
By selecting a motor, the thermal characteristic
and motor constant of each motor are set.
450
C200
Second applied motor 9999
0, 3, 5, 6, 10, 13, 15, 16, 20, 23,
30, 33, 40, 43, 50, 53, 70, 73,
1800, 1803, 8090, 8093, 9090,
9093
*1
Set this parameter when using the second motor
(the same specifications as
Pr.71 ).
9999 The function is disabled.