Mitsubishi Electric Ecodan PUHZ-HW140VHA-BS Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 87

background image

25

Main Controller

(continued)

Option 2.

From the main menu screen press button F4. The current settings screen will be displayed. Press button F4 again
to access the holiday mode activation screen.

Once the holiday mode activation screen is displayed you can activate/deactivate and select the duration that you
would like holiday mode to run for. Press button F1 to activate or deactivate holiday mode. Use buttons F2, F3 and
F4 to input the date which you would like holiday mode to activate or deactivate for space heating.

Editing Holiday Mode

To change the holiday mode settings e.g. the flow temp, you must access the holiday mode menu from the main
settings menu.

• From main menu screen press button B.
• Use buttons F2 and F3 to scroll through menu until Holiday Mode is highlighted.
• Press CONFIRM button.
• The holiday mode status screen is displayed.
• To change the flow temperature or room temperatures on heating mode press button F3.
• A list of variables will be displayed. Choose the one you wish to modify using buttons F1/F2 then

press CONFIRM.

• Adjust the temperature using buttons F3 and F2 and press CONFIRM button to save changes.

Schedule timer

The schedule timer mode allows daily and weekly space heating and DHW patterns to be entered.

1. From the main settings menu use F2 and F3 to highlight the schedule timer icon then press CONFIRM.
2. The schedule timer sub menu will be displayed. The icons show the following modes;

• Heating
• Hot Water (DHW)

3. Use F2 and F3 buttons to move between mode icons then press CONFIRM to be shown the preview

screen for each mode.

The preview screen allows you to view the current settings. In 2-zone heating operation, press F1 to switch
between Zone1 and Zone2. Days of the week are displayed across the top of the screen. Where day appears
underlined the settings are the same for all those days underlined. Hours of the day and night are represented as
a bar across the main part of the screen. Where the bar is solid black, space heating/DHW (whichever is selected)
is allowed.

58

Pre-Plumbed Slimline Cylinder Installation Manual

«
...
56
57
58
59
60
...
»

Содержание Ecodan PUHZ-HW140VHA-BS
























































































Отзывы:

Нет отзывов

Похожие инструкции для Ecodan PUHZ-HW140VHA-BS

Бренд: Rasonic Страницы: 8

Бренд: Panasonic Страницы: 20

Бренд: Dantherm Страницы: 12

Бренд: HELLER Страницы: 6

Бренд: Warmtech Страницы: 21

Бренд: iGenix Страницы: 9

Бренд: vacuubrand Страницы: 70

Бренд: L.B. White Страницы: 24

Бренд: Black Knight Страницы: 15

DrainPress 3200/24 Set

Бренд: T.I.P. Страницы: 68

Бренд: Easy@Home Страницы: 20

York YH9FYH12BAH-A-X

Бренд: Johnson Controls Страницы: 30

Бренд: Zephir Страницы: 15

Бренд: Comet Страницы: 9

DYNAMIC-SS/X8/C

Бренд: HydroTherm Страницы: 4

Бренд: Nevir Страницы: 28

Бренд: Waspper Страницы: 11

Бренд: Biral Страницы: 156

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды