Mitsubishi Electric DX-TL2500U, Инструкция по установке и эксплуатации

Страница: 61 / 100

61
61
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Setting of “ALARM SENS” ( default : “OFF” )
“ON” : When alarm terminal is activated, the DVR trans-
mits the status information to connected PC. E-mail is
sent to address displayed on “USER ADDRESS” of the
<E-MAIL ADDRESS> screen.
“OFF” : Does not transmit.
Setting of “REC MODE” ( default : “OFF” )
“ON” : Transmits the recording status such as normal
recording or alarm recording to connected PC. E-mail
is sent to address displayed on “USER ADDRESS” of
the <E-MAIL ADDRESS> screen.
OFF : Does not transmit.
Setting of “RETRY TIME” ( default : “10S” )
1S, 2S, • • • •, 10S, • • • • • • 59S, 60S
7. Turn the JOG dial to display the desired setting and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and stops flashing.
8. Turn the SHUTTLE ring counterclockwise to return to the
<ETHERNET> screen, and press the SET UP button.
9. When the setting are changed, the unit turns off and on
automatically updating the new settings.
■
CAMERA CONTROL
Select camera type, protocol control, baud rate and ad-
dress of each camera connected.
The optional remote control R-2500 is required, press
display button on remote till PTZ is displayed for control.
Setting of “PTZ CONTROL”
“PELCO-2400” : PELCO “D”PROTOCOL 2400bps
“PELCO-4800” : PELCO “D”PROTOCOL 4800bps
“PELCO-9600” : PELCO “D”PROTOCOL 9600bps
“A.D.” : American Dynamics RS-422/RS-485 protocol
4800bps
“OMIKRON” : OMIKRON protocol converter 192000bps
Setting of “ADDRESS” ( default : “001” )
“001”, “002”, • • • • • • • • • •, “127”, “128”
Please set a “ADDRESS” setting as the same set-
ting as ADDRESS of a camera.
Please contact your sales agent for dealer.
1. Press the SET UP button
}
<SETTINGS>
}
Select
“CAMERA CONTROL” in the <INITIAL SET UP/
INFORMATION> screen and turn the SHUTTLE ring clockwise.
• The <CAMERA CONTROL> screen appears.
<CAMERA CONTROL> 1/2
<CAMERA CONTROL>
NO PTZ CONTROL ADDRESS
>> ----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
NEXT PAGE
9
7
4
5
6
1
2
3
8
<CAMERA CONTROL> 2/2
<CAMERA CONTROL>
NO PTZ CONTROL ADDRESS
>> ----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
----- 001
10
10
11
11
13 13
14
14
15 15
16
16
12
12
■
INFORMATION/SERVICE
The <INFORMATION/SERVICE> screen is used to
check the warning log, device lists and initialization menu
after a power failure. The total operating time is displayed
on the 2/2 screen.
<INFORMATION/SERVICE> 1/2
<INFORMATION/SERVICE> (1/2)
>>HDD INFORMATION
ARCHIVE/COPY INFORMATION
CFC INFORMATION
WARNING LOG LIST
RESET TO FACTORY SETTINGS
MAIN HDD DATA CLEAR
SUB HDD DATA CLEAR
CFC DATA CLEAR
ARCHIVE DATA CLEAR
COPY DATA CLEAR
<INFORMATION/SERVICE> 2/2
<INFORMATION/SERVICE> (2/2)
ELAPSED TIME: SYSTEM 3H
ARCHIVE 0H
COPY 0H
HDD SETTING PARTITION
PARTITION SIZE 10
%
The <INFORMATION/SERVICE> screen consists
of 2 pages. The second page is displayed by turning
the JOG dial clockwise when the cursor points at the
setting of the bottom of the screen.
“ARCHIVE/COPY INFORMATION”, “COPY DATA
CLEAR”, and “ARCHIVE DATA CLEAR” appear on
page 1/2 of the <INFORMATION/SERVICE> screen
when “ARCHIVE•COPY” is selected on “ID4•ID5” of
the <INITIALIZATION> screen.
“ARCHIVE” and “COPY” operating time appear on
page 2/2 of the <INFORMATION/SERVICE> screen
when “ARCHIVE•COPY” is selected on “ID4•ID5” of
the <INITIALIZATION> screen.
“SUB HDD DATA CLEAR” appears on page 1/2 of
the <INFORMATION/SERVICE> screen when “PAR-
TITION” is selected on “HDD SETTING” of the <INI-
TIALIZATION> screen.
♦
HDD INFORMATION/ARCHIVE/COPY
INFORMATION/CFC INFORMATION
This INFORMATION is used to check the connection
status of all internal and external peripheral recording
devices, and the amount of available apace (HDD, AR-
CHIVE/COPY/Compact Flash Card).